T1a Wrecking Bar
IMAGE DISPLAY AND FEATURES
·Tough Bull iconic designed and Engineered Flat-Oct profile shank provides max leverage with lighter material
·Full curved blade profile can act as Fulcrum to maximize the lifting power
·Curved angle design for easy leverage and continuous rolling lifting
·Wide blade protects base material, wide blade also avoid side rolling
·Flat-Oct shank enble wider profile shank to avoid the whole bar from rolling
·Flat-Oct shank enble thicker material in the bending direction provide greater strength
·Low profile sharp blade goes into narrower gaps
·Long claw-ends can go deeper under lifted objects
·Nail slot on the end of claw allows for pulling nails with ease
·Powder Coating Finish provides durability, anti-rust properties and easy spotting on the job site
MODEL
| Art. No. | Length | Shank Size | Material | Hardening Area | Loading Capacity Nail End (*) | Loading Capacity Chisel End (*) | Weight |
|---|---|---|---|---|---|---|---|
| T1a12 | 12"(305mm) | 20x11mm | 1045 Carbon Steel | Two Ends | 180Kg(440N*M) | 180Kg(440N*M) | 0.502kg |
| T1a15 | 15"(380mm) | 20x11mm | 1045 Carbon Steel | Two Ends | 140Kg(440N*M) | 140Kg(440N*M) | 0.615kg |
| T1a18 | 18"(455mm) | 20x11mm | 1045 Carbon Steel | Two Ends | 115Kg(440N*M) | 115Kg(440N*M) | 0.745kg |
| T1a24 | 24"(610mm) | 22x14mm | 1045 Carbon Steel | Two Ends | 130kg(650N*M) | 130kg(650N*M) | 1.365kg |
| T1a30 | 30"(760mm) | 22x14mm | 1045 Carbon Steel | Two Ends | 100kg(650N*M) | 100kg(650N*M) | 1.703kg |
| T1a36 | 36"(915mm) | 22x14mm | 1045 Carbon Steel | Two Ends | 82kg(650N*M) | 82kg(650N*M) | 2.038kg |
*The values are based on Tough Bull in-house testing.
**LCW Ratio: Loading Capacity (Torque) divided by product weight. This parameter assesses the torque performance of matrials of equal mass.
Tacland (Thailand) Co.,Ltd.All rights reserved.
